Hyperstrong · Liquid cooling · Schrank
Hyperstrong HyperCube C&I II Max
Fully liquid-cooled C&I system for outdoor use: 836 kWh, 240 kW (400 V), grid-forming capable — for energy-intensive industry, charging hubs and microgrids.
Technical data
| System | |
|---|---|
| Nominal capacity | 836 kWh |
| Cell type | LFP 314 Ah |
| Cooling | Liquid cooling |
| Form factor | Schrank |
| Cycle life | 6,000 |
| Max. depth of discharge | 95 % |
| Grid & power | |
| AC power | 240 kW |
| Grid voltage | 400 V |
| On/off-grid switching | Yes |
| Direct PV input | No |
| Installation | |
| Dimensions (W×D×H) | 1450×2400×2400 mm |
| Weight | 8.1 t |
| IP rating | IP55 (Batterie-/Elektroraum), Pack IP65 |
| Fire protection | Aerosol-Wassersprühsystem, Multifunktionsdetektor |
Technical data per the manufacturer's datasheet; binding values depend on configuration and project.
Fully liquid-cooled C&I system for outdoor use: 836 kWh and 240 kW at 400 V (432 kW at 690/800 V), grid-forming capable — built for energy-intensive industry, charging hubs and microgrids.
Frequently asked questions
Which applications is the HyperCube C&I II Max designed for?
For energy-intensive industry, charging hubs and microgrids — as a fully liquid-cooled C&I system for outdoor use.
What capacity and power does the system offer?
836 kWh of nominal storage capacity on LFP cells (314 Ah) and 240 kW at 400 V. Binding values depend on configuration and project — see the manufacturer's datasheet.
Is the HyperCube C&I II Max grid-forming capable?
Yes. According to the datasheet the system is grid-forming capable and therefore also intended for microgrid applications.
What service life can be expected?
According to the datasheet, up to 6,000 cycles at up to 95 % depth of discharge.
Is the system suitable for outdoor installation?
Yes. Battery and electrical compartments are rated IP55 and the battery packs IP65; an aerosol water-spray system with a multifunction detector is integrated.