Storage for load peaks
Load peaks often last only minutes, yet they can heavily affect the grid connection and the cost structure.
Load peaks often last only minutes, yet they can heavily affect the grid connection and the cost structure.
Why does this topic matter?
- storage power in kW is central
- the EMS must react fast
- the load profile shows duration and frequency
- PV can recharge the storage system
Matching products and solutions
The OmniCube A215, Elecnova E261LP, E10FT/E20FT, and PotisBank for MW-scale peaks.
What data do we need?
- 15-minute load profile
- electricity bill and grid bill
- PV capacity and PV generation
- grid connection capacity
- information on e-mobility
- critical loads for backup power
- installation site and photos
Frequently asked questions
Why are load peaks a problem for businesses?
Load peaks often last only minutes, yet they can heavily affect the grid connection and the cost structure.
What matters for peak shaving with storage?
Storage power in kW is central; the EMS must react fast, the load profile shows duration and frequency of the peaks, and PV can recharge the storage system.
Which storage systems are suitable for load peaks?
The OmniCube A215, Elecnova E261LP and E10FT/E20FT; for MW-scale peaks, the PotisBank.
Matching products
-
LONGi LONGi OmniCube A215 Integrated DC flexibility system for commerce and industry: 215 kWh, 105 kW, optional STS for grid/island operation and direct PV connection via MPPT.
215 kWh · 105 kW
-
Elecnova Elecnova ECO-E261LP-2A All-in-one liquid-cooled storage cabinet: 261 kWh, 125 kW on a 1.4 m² footprint, with a cell temperature spread below 3 °C.
261 kWh · 125 kW
-
Elecnova Elecnova ECO-E10FT1044LP-2 Highly integrated 10 ft storage container with integrated STS: 1,044 kWh, 500 kW, seamless on/off-grid transfer in under 20 ms, interfaces for diesel and PV.
1.04 MWh · 500 kW
-
LONGi LONGi PotisBank L5.0 Liquid-cooled utility-scale ESS in a 20 ft container: 5.0 MWh DC block with the ICCS safety system for grid-scale storage projects.
5 MWh